AC1000 Posted March 7, 2016 Share Posted March 7, 2016 Hi It is not possible to select multiple paths when using sweep tool. I have to extrude unique source object along many different paths. Now there is too much mouse clicks to complete the task. Any ideas? Link to comment Share on other sites More sharing options...
Tech Posted March 9, 2016 Share Posted March 9, 2016 Hi AC, There is currently an option to sweep multiple sources along the same path, but not along multiple paths. Perhaps this can be added for the future. Hi Willis, Welcome to the forum! If you have any trouble with a sweep operation, can you please post or email a file with your source shape and path object, and indicate what you are trying to get as your result? If so, we will do our best to help. Link to comment Share on other sites More sharing options...
setz Posted March 9, 2016 Share Posted March 9, 2016 +1 I would use this often Link to comment Share on other sites More sharing options...
allanjl Posted March 10, 2016 Share Posted March 10, 2016 +1 Link to comment Share on other sites More sharing options...
Andy Posted March 11, 2016 Share Posted March 11, 2016 +1 Link to comment Share on other sites More sharing options...
Des Posted March 11, 2016 Share Posted March 11, 2016 I seem to remember an old script that allowed multiple path sweeps for v6. I used it for sweeping a section on hundreds of paths at the same time for power lines. It was so handy. There were loads of great scripts back then.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.