vpete Posted January 2, 2015 Share Posted January 2, 2015 Any way to be able to control the preview representation on screen (or even printed) of the point guide object? Thanks! Link to comment Share on other sites More sharing options...
Tech Posted January 2, 2015 Share Posted January 2, 2015 Hi Pete, There is not a setting for this. Is there something specific you wish to do? Link to comment Share on other sites More sharing options...
vpete Posted January 2, 2015 Author Share Posted January 2, 2015 Yes, be able to adjust the size of the point. They can be colored to help call them out (a bit better), but being able to adjust the size, like some of the dimensioning scaling would be great... like 2x the set size. I am using them as markers on complex surfaces and linework and they are hard to make out if colored differently. Thanks! Link to comment Share on other sites More sharing options...
Tech Posted January 2, 2015 Share Posted January 2, 2015 Ok, thanks for your suggestion... Link to comment Share on other sites More sharing options...
vva Posted January 2, 2015 Share Posted January 2, 2015 vpete. I use to switch on the "Show Axis" for the points I want to see. The axis are independent of zoom and you can switch them all together easily vva Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.