Dtech Posted August 14, 2016 Share Posted August 14, 2016 Hi, how do you stop the tool from hatching the hole? Link to comment Share on other sites More sharing options...
AHTOH Posted August 14, 2016 Share Posted August 14, 2016 Are you sure it is an actual hole? Did you do boolean difference? When I did I got a result like this: Best, Anton. Link to comment Share on other sites More sharing options...
Tech Posted August 15, 2016 Share Posted August 15, 2016 Hi DTech, Yes, if your object or section is at a location where there is a hole this should happen automatically as Anton suggests. If you have a case where this is not working (and you have checked your section depth and are sure it is cutting through a hole), please send the FMZ and FML file to us (to support@formz.com -- or ZIP and post it here if it is small enough) and we will see what else we can do to help. Link to comment Share on other sites More sharing options...
Dtech Posted August 16, 2016 Author Share Posted August 16, 2016 Thanks for your help Anton and Tech, I tried to upload the file but the upload would not work for some reason, it’s only 213kb. I have attached a screenshot. Link to comment Share on other sites More sharing options...
Tech Posted August 16, 2016 Share Posted August 16, 2016 Do you have Show Hatches checked from the Display Options? If so, and you still need help, ZIP the file first, then upload it... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.