kmwhitt Posted March 11, 2016 Share Posted March 11, 2016 I will need to round my sink model using two radii - 1-1/4" and 2-1/2". The 2-1/2" radius is for the two segments shown in the 1st attachment only. All other selected segments (in red) are to be 1-1/4". The rounding tool does a beautiful job of rounding all of the segments at 1-1/4" - 2nd attachment, but is it possible with this geometry to use both radii? I have tried controlled rounding which I thought would update to adjust to changes in other sets. Is this how the C-Round tool is supposed to work? If not, how should I go about using both radii? Is it recommended I use another method to model this? I considered subdivision modeling, however, the results are more visual and not totally accurate. Thanks, Kevin. Link to comment Share on other sites More sharing options...
kmwhitt Posted March 11, 2016 Author Share Posted March 11, 2016 I finally got C-Round to work. I am finding the order in which you round your sets makes a huge difference. What a really powerful tool! Link to comment Share on other sites More sharing options...
d_b Posted March 11, 2016 Share Posted March 11, 2016 I finally got C-Round to work. I am finding the order in which you round your sets makes a huge difference. What a really powerful tool! Just out of curiosity, which sections did you round first? Link to comment Share on other sites More sharing options...
kmwhitt Posted March 11, 2016 Author Share Posted March 11, 2016 It took several attempts, but attached is the final C-Round order. sink_C_ROUND.zip Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.