Dtech Posted August 14, 2016 Share Posted August 14, 2016 Hi, I have been trying to change the size of a cylinder to 10.2mm but it reverts to 10.000mm every time, if I change it to 10.5mm it changes the size automatically to 11mm, where is the setting for this please? When I was trying to change the size the program crashed. Link to comment Share on other sites More sharing options...
DennisA Posted August 14, 2016 Share Posted August 14, 2016 Not sure about message but try setting File/Project Settings/Working Units to Small Lamp Link to comment Share on other sites More sharing options...
jsiggia Posted August 14, 2016 Share Posted August 14, 2016 You can use the pic tool you have selected. Go th the tool options and select Parameters as I show in the attached screen shots. Hope this helps, Joe Link to comment Share on other sites More sharing options...
AHTOH Posted August 15, 2016 Share Posted August 15, 2016 Hi, I have been trying to change the size of a cylinder to 10.2mm but it reverts to 10.000mm every time, if I change it to 10.5mm it changes the size automatically to 11mm, where is the setting for this please? When I was trying to change the size the program crashed. Hi Dtech. Go to File -> Project Settings -> Working Units and change Numeric accuracy to 0,1 mm. You have it set to 1 mm so FormZ changes it to closest value. Enjoy. Link to comment Share on other sites More sharing options...
Tech Posted August 15, 2016 Share Posted August 15, 2016 Hi Dtech, Yes, as Anton notes, reduce the Unit Accuracy (and / or the Data Scale) from the File: Project Settings: Working Units. We are not sure why you would encounter a crash trying to change the value as you describe. If you reboot your computer, can you still reproduce the problem? If so, can you post the file and let us know exactly how you are trying to change the value so we can test this here? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.