allanjl Posted April 20, 2015 Share Posted April 20, 2015 Greetigs all, Often we export to Rhino via Step and to sketchup via dae. Overtime we have found that creating step files is a breeze. Whereas creating dae files is a crapshoot. In this specific case, we found that if we tried exporting all objects lead to a crash, whereas if we moved a number of these objects to a few layers, then exporting worked fine. Please take a look at the attached file. You will find 3 layers. If you check the objects with the object doctor you will find very few minor issues. If you try exporting all 3 layers formZ will crash. If you try exporting one layer at the time, there's no problem. We used formZ v8.0.2 32 and 64 bit on PC's. Support, we hope this can be corrected in the future. Allan Link to comment Share on other sites More sharing options...
allanjl Posted April 20, 2015 Author Share Posted April 20, 2015 Apparently I cannot attach the file. Here's via dropbox: https://dl.dropboxusercontent.com/u/71585590/FORMZ%20ISSUES/mullions.fmz Link to comment Share on other sites More sharing options...
Tech Posted April 20, 2015 Share Posted April 20, 2015 Hi Allan, If you Triangulate All faces before exporting, then it will export properly. Thanks for your report, we will get this corrected. (Just zip the file and attach it to your post in the future if you like.) Link to comment Share on other sites More sharing options...
allanjl Posted April 20, 2015 Author Share Posted April 20, 2015 Thank you! Link to comment Share on other sites More sharing options...
Tech Posted April 20, 2015 Share Posted April 20, 2015 No problem, and thanks again for bringing this to our attention! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.