TwoSheaStl Posted March 2, 2015 Share Posted March 2, 2015 When drawing a square (no snaps turned on), I want to begin my shape very close into a corner and drag down into another corner. The drawing tolerance only lets me get so close to the corners (almost like there is still some type of snap turned on). Is there a way to get this more precise? So I can start and end my shapes in very precise locations (zoomed in) with no snap turned on? Thanks! Link to comment Share on other sites More sharing options...
Tech Posted March 2, 2015 Share Posted March 2, 2015 Hi Shea, By default the Working Units: Unit Accuracy will be an inherent snap that will help you keep everything nicely aligned, but if you need to reduce this value, you can do so via the File Menu: Project Settings. How are your shapes getting mis-aligned in the first place? Link to comment Share on other sites More sharing options...
TwoSheaStl Posted March 2, 2015 Author Share Posted March 2, 2015 It's just a matter of preference for me. I hardly snap anything; I just like to zoom really close and eyeball my shapes. What do I change within working units options? Link to comment Share on other sites More sharing options...
Tech Posted March 2, 2015 Share Posted March 2, 2015 Why waste time zooming really close -- just snap! Or, re-read our previous answer if you like zooming continuously... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.