dmuller Posted January 5, 2015 Share Posted January 5, 2015 Hi, I'm relatively new to FZ having played with the Jr version over the last month. A couple of things strike me from watching the tutorial videos and I'm not sure if these are not showing up due to the limitations of Jr over the full version. 1. I do not get any automated guides when creating shapes. I have to rely on using manually placed guides only. 2. I do not see the drawing grid on any primitives surfaces I create, so the snapping to a surface is not a default. Is this a limitation of Jr (formerly Bonzai). Regards, David. Link to comment Share on other sites More sharing options...
dmuller Posted January 5, 2015 Author Share Posted January 5, 2015 Scratch (some of) that. I just applied the update and the grids have appeared. It's just the automatic guides that don't seem to be visible now. Link to comment Share on other sites More sharing options...
dmuller Posted January 5, 2015 Author Share Posted January 5, 2015 Scratch both and delete, everything is now visible just as it should be! Link to comment Share on other sites More sharing options...
Tech Posted January 5, 2015 Share Posted January 5, 2015 Hi David, That's strange, do you know what you did to solve this? Of course in order to see the Guides you need to have the Guide Snap Active -- but it sounds like there may have been something else going on. Link to comment Share on other sites More sharing options...
dmuller Posted January 8, 2015 Author Share Posted January 8, 2015 Well, I didn't really alter anything from the default (as I'm not yet familiar enough with the app to know how to). On the trial version, running on an Intel Duo iMac and Mountain Lion I definitely didn't have the grid lines and face grids. On Yosemite on the new iMac Intel i7 they were missing on initial installation and then visible after applying the patch. I'm not aware that I turned anything on or off in the settings in the interim though. Link to comment Share on other sites More sharing options...
Tech Posted January 8, 2015 Share Posted January 8, 2015 Hi David, Ok, we are not aware of anything that would cause this, but good to hear that it is all working properly for you now... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.