DaveVT Posted March 20, 2017 Share Posted March 20, 2017 Sorry if this has already been addressed. Is there a toggle that can be set to over ride the representation of solids being cut by the plane to a single selected color like white, grey or black? If not could it be added? Thank you. Link to comment Share on other sites More sharing options...
Des Posted March 20, 2017 Share Posted March 20, 2017 I assume you are talking about the colour of the solid where it is being cut? You can set the colour by selecting the solid, go to pick options, select the dropdown menu "Cross Section" and the options for colours are there. Des Link to comment Share on other sites More sharing options...
DaveVT Posted March 20, 2017 Author Share Posted March 20, 2017 My question is, is it possible after the fact, to change the representation of the cross section created by the clipping plane(s) of any and all objects in the model by a simple toggle switch and specification of the color to be used? That is as opposed to your suggestion to select object and change the representation one by one. This is purely a view time setting that is nondestructive to the model as created. Link to comment Share on other sites More sharing options...
¢hris £und Posted March 20, 2017 Share Posted March 20, 2017 You can select all, then click on the radio button with the dash on it. that will switch them all to the same "current" color. Seems like a script could make this a little more elegant. ¢£ Link to comment Share on other sites More sharing options...
DaveVT Posted March 21, 2017 Author Share Posted March 21, 2017 Christopher, thank you, that works. Link to comment Share on other sites More sharing options...
etroxel Posted March 21, 2017 Share Posted March 21, 2017 You can go into project settings and change it globally as well, but only the color, not a hatch. Link to comment Share on other sites More sharing options...
AsOne Posted April 3, 2017 Share Posted April 3, 2017 This feature is buggy. For example if I change the color of cross section of a green box to black - it just turns it darker green. Same for any grey or white. I also find some colors are not correct. It's as if the cross section color is blended with the color of the box. Also would be great to have control of the line weight, besides 1-5 choices. We should have access to normal line weights and line styles. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.