Jump to content


Photo

Let me remind about our models exchange site


  • Please log in to reply
20 replies to this topic

#1 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 18 February 2017 - 10:39 AM

Or let the ones of you who does not let to know there is one.

It`s name Re: construction - FormZ models sharing and it is located at http://www.formz.xyz

You are welcome to download models from there for free. And you are more than welcome to upload your models there.

 

If by some accident you might want to support this site I run you can provide me with FormZ modeling, rendering or design job  :) .

 

As for today I added some new models in:

Lamps&Lights

Appliances.

 

Wall Mount Loft Design.jpg

ARDO Built in Microvawe.jpg

Exhaust Inclined.jpg

 

As usual: "If  you need to have any model with textures or Maxwell/Thea materials it is going to be as low as $10 per model. If model was submitted by another user I will send a half of the amount to him/her."


  • Justin Montoya, Rudy Daverveld, qapedkat and 8 others like this

Anton Voloshin,

architect, interior designer, product designer.


#2 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 19 February 2017 - 07:15 AM

And here are new files submission!

 

Thank you Andrew West.

 

And everybody are welcome to download these:

 

 

Attached Thumbnails

  • Andrew West Floor lamp.jpg
  • Andrew West lamps.jpg
  • Andrew West SIMAS bath.jpg
  • Bose wave music system.jpg

Anton Voloshin,

architect, interior designer, product designer.


#3 Tech

Tech

    Moderator

  • Moderators
  • 4,110 posts

Posted 19 February 2017 - 11:43 AM

Thanks Anton!

 

Hopefully you can get some more quality FMZ models submitted from the rest of our users to expand your project in the future.  ;)



#4 bluemonkey

bluemonkey

    Advanced Member

  • Members
  • PipPipPip
  • 78 posts

Posted 20 February 2017 - 05:00 AM

Thanks Anton for setting up this resource - I have looked at a few times and even downloaded a few models - unfortunately I didn't use them in the final designs.

 

Is there anyway Tech could pin this thread to make it easier to find the site. Or give it some other kind of prominence?

 

Last time I used it I had to search back through stuff to find it. This could become an even better resource for users if new users knew it was there.

 

Thanks Anton for adding to our great community!


  • AHTOH likes this

#5 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 20 February 2017 - 11:31 AM

Thanks Anton for setting up this resource - I have looked at a few times and even downloaded a few models - unfortunately I didn't use them in the final designs.

 

Is there anyway Tech could pin this thread to make it easier to find the site. Or give it some other kind of prominence?

 

Last time I used it I had to search back through stuff to find it. This could become an even better resource for users if new users knew it was there.

 

Thanks Anton for adding to our great community!

Hi bluemonkey.

Yes it would be nice if Tech could pin it to the top. Meanwhile you could like a Facebook page and keep up to date.

Best,

Anton.


Anton Voloshin,

architect, interior designer, product designer.


#6 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 27 February 2017 - 10:16 AM

A pulley pendant model added.

Loft Style Pulley pendant.jpg

 

Loft Style Pulley pendant 2.jpg

 

 

Enjoy.


Anton Voloshin,

architect, interior designer, product designer.


#7 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 06 March 2017 - 05:17 AM

Siemens coffee machine added to Kitchen

 

Siemens Coffee Machine.jpg


Anton Voloshin,

architect, interior designer, product designer.


#8 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 06 March 2017 - 11:09 AM

Some more models here

Intercom Commax.jpg

Tom Dixon Copper pendant.jpg


Anton Voloshin,

architect, interior designer, product designer.


#9 Chris lund

Chris lund

    Advanced Member

  • Members
  • PipPipPip
  • 567 posts
  • LocationWestcliffe Colorado

Posted 06 March 2017 - 12:06 PM

Sent multiple in the same upload.  hope they all made it.

 

cheers!

 

Chris Lund


Christopher Lund

Neurascenic - Industrial Design


#10 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 06 March 2017 - 01:26 PM

Sent multiple in the same upload.  hope they all made it.

 

cheers!

 

Chris Lund

Hi Chris.

Thank`s a lot. I got them all.

I indulged myself to tweak it a little bit in order to have renders unified with the other ones on site. And I resaved them into 8.5.  I hope you don`t mind.

 

MiniClamp.jpg

tacklebox.jpg

CoffeeTable.jpg

GarlicPress.jpg

 

Best regards,

Anton.


Anton Voloshin,

architect, interior designer, product designer.


#11 Chris lund

Chris lund

    Advanced Member

  • Members
  • PipPipPip
  • 567 posts
  • LocationWestcliffe Colorado

Posted 06 March 2017 - 03:34 PM

Not at all!   I'll see what else I can dig up.


  • AHTOH likes this

Christopher Lund

Neurascenic - Industrial Design


#12 Des

Des

    Advanced Member

  • Members
  • PipPipPip
  • 362 posts
  • LocationIreland

Posted 07 March 2017 - 04:07 AM

Hey Chris, I remember that clamp from many, many moons ago..  ;)

 

Anton, don't forget the few models I emailed you last week...

 

Des

 

 



#13 Chris lund

Chris lund

    Advanced Member

  • Members
  • PipPipPip
  • 567 posts
  • LocationWestcliffe Colorado

Posted 07 March 2017 - 12:33 PM

Des,  Yea, it was back from when I was trying to do the same thing with Zdepot.   I still have everybody's models that were submitted then,

 

Not sure if I can put them up without permission.  

Here is the list of people that contributed back then.

 

Bart Hays, Dan Manoim, Stefan Dewachter, Gary Moad, Justin Werner, Roger Rios, Bern Meissner, Chris Lawes, Bo Atkinson, Guy Manley, Maher Sami and Jamie Radford.

If any of you guys give the go ahead, I will submit your models with credit to you.

 

Anton,  if your wondering,  I ran out of time to be able to keep up with it.

 

Cheers!

 

¢£


Christopher Lund

Neurascenic - Industrial Design


#14 ASONE

ASONE

    Advanced Member

  • Members
  • PipPipPip
  • 301 posts
  • LocationBoulder, Colorado, USA

Posted 07 March 2017 - 01:41 PM

ANTOH,

 

I think you have mentioned before about doing FormZ work.  Would you be interested in building a few models for me in the future?  I need to build up my library.  Usually I go to SketchUp warehouse for furniture, but it takes time to import and adjust for FormZ.  It would be better for me to have a selection of FormZ items ready to go.  I also need to build up a good selection of 2D trees and plants - cutouts on a transparent background.  


FormZ PRO v8.5.  2017 iMac 4.0 GHz quad core i7 24MB RAM and a 2015 Macbook Pro quad core i7 16MB RAM, Modern Architecture in Boulder and Denver Colorado www.ASONEarchitecture.com 


#15 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 07 March 2017 - 04:51 PM

ANTOH,

 

I think you have mentioned before about doing FormZ work.  Would you be interested in building a few models for me in the future?  I need to build up my library.  Usually I go to SketchUp warehouse for furniture, but it takes time to import and adjust for FormZ.  It would be better for me to have a selection of FormZ items ready to go.  I also need to build up a good selection of 2D trees and plants - cutouts on a transparent background.  

Hi ASONE.

Yes. I definitely would be happy to do this for you. Please do not hesitate to contact me as soon as you need help.

Best,

Anton.


Anton Voloshin,

architect, interior designer, product designer.


#16 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 07 March 2017 - 04:57 PM

 

Anton, don't forget the few models I emailed you last week...

 

Des

Hi Desmond.

It`s been really crazy month. I am afraid those buried somewhere. I am terribly sorry! Would you please resend them either via email or Dropbox or via formz.xyz submission form. I will place them to repository ASAP.

Best regards,

Anton.


Anton Voloshin,

architect, interior designer, product designer.


#17 Des

Des

    Advanced Member

  • Members
  • PipPipPip
  • 362 posts
  • LocationIreland

Posted 08 March 2017 - 03:58 AM

It's good that you're busy Anton..

 

Des



#18 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 20 March 2017 - 03:50 AM

Our friends Desmond Clarke and Alan Cooper where generous and shared their nice models with us. 

HeathfieldMirandeLamp.jpg Des

BedStemLamp.jpg  Des

LuggageRack.jpg  Des

RocaBin.jpg  Des

BedsideTables.jpg  Des

170310WineBottleMarques01.jpg Alan

 

Thank you guys!

Best regards,

Anton Voloshin.


  • Des and Rudy Daverveld like this

Anton Voloshin,

architect, interior designer, product designer.


#19 AHTOH

AHTOH

    Advanced Member

  • Members
  • PipPipPip
  • 447 posts
  • LocationMoscow, Russian Federation

Posted 26 March 2017 - 10:41 AM

Hello everybody.

 

I added some more pieces at Formz.xyz. You might want to take a look at Facebook page to see what`s going on.

 

Attached Thumbnails

  • Wall Mount Loft Design 778 model.jpg
  • Antique Pendant Lamp.jpg
  • Plugs european.jpg
  • Tom Dixon Copper pendant.jpg
  • Laufen Pro Sink S8-1096-2000-104.jpg
  • Hatria Happy Hour Washbasin.jpg
  • IKEA Helloshen kitchen Sink.jpg

  • Rudy Daverveld likes this

Anton Voloshin,

architect, interior designer, product designer.


#20 Des

Des

    Advanced Member

  • Members
  • PipPipPip
  • 362 posts
  • LocationIreland

Posted 27 March 2017 - 02:24 AM

Come on Autodessys, you need to promote this on your site with a direct link...

 


  • AHTOH, bluemonkey and Chris lund like this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users