DJAB Posted November 7, 2016 Share Posted November 7, 2016 Hi Guys, See attached screen shots, when you look closely at the tiled floor, which is a maxwell material from the website, you can see something weird is happening where it appears to be broken or misaligned somehow. (The floor is just a flat plane). Im a total novice when I comes to rendering, any ideas whats going on? Maxwell 4 / Formz 8.5 pro / Mac Link to comment Share on other sites More sharing options...
DJAB Posted November 7, 2016 Author Share Posted November 7, 2016 Here is what it looks like in Form z... (looks fine) Link to comment Share on other sites More sharing options...
pylon Posted November 8, 2016 Share Posted November 8, 2016 Please send a formZ project file with just the tile plane exhibiting the issue, the MXM referenced, and all the bitmaps used by the MXM. (You can use Maxwell Render > Workstation Transfer to collect the dependencies.) Please ZIP the project and dependencies and send via Dropbox (or equivalent) to We will investigate why this might be happening and report back with a solution. Link to comment Share on other sites More sharing options...
DJAB Posted November 9, 2016 Author Share Posted November 9, 2016 Hi Pylon, I have sent the file to your email. If opened in Studio and rendered with CPU, there is a problem, but render the exact same view with GPU and its corrected. (See screen shots) Andy Link to comment Share on other sites More sharing options...
pylon Posted November 10, 2016 Share Posted November 10, 2016 Andy, There is something wrong with the shop floor object. If you derive the top face (Derive Face Tool) and then re-extrude it with the Reshape tool, I have found that the tile will render correctly. Let me know if this helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.