Jump to content
AutoDesSys

Parameters not responding.


Hugo

Recommended Posts

Hi Hugo,

 

Yes, unfortunately this is an undesired side effect of one of the fixes.  Thanks for your report, we will get this corrected ASAP.  If you would like to revert to the previous version (without this issue) you can download the 8.5.4 version from here:

 

www.formz.com/update

Link to comment
Share on other sites

Yes, I would like to install the previous version on my main computer.

 

But I am not allowed to install after download from here:www.formz.com/update.

 

Apple Sierra won't let me do that, and I don't know where to find that option anymore.

 

Any solution?

Link to comment
Share on other sites

I mentioned this soon after it was released in the "form•Z 8.5.5 Update Released!" post at the top.

I decided not to reinstall the previous version because a simple workaround is to use the grid snap.

Set it to what ever multiple you want and it snaps to that. It also snaps to other objects fine.

 

Des

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Ok, we have found  a computer on which we can reproduce this. 

 

If you Extrude from a 3d view, or if you Reshape from a Top (or other) view, then this should work properly for you.

 

Does that help?

 

Thanks for your report, we will get this corrected.

 

Link to comment
Share on other sites

Maybe related to the "top view" issue, I cant "frame-select" faces in shaded mode from top view.

 

(It only works in wireframe, or when I rotate the view to see the face)

 

Its a bit annoying when you know the face is just there - (I.e. end of a steel profile or similar you want to extend/move)

I am not sure if it is "expected behaviour"...

 

 

Link to comment
Share on other sites

Hi R2,

 

Yes, in general the paradigm is that if you can see the part, you should be able to select it, and with Shaded Views, you can't see the side or back faces so they are expected to not be selected.  Switching to Wire Frame is the "normal" solution to getting what you want in this case.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...