palarsen Posted November 4, 2014 Share Posted November 4, 2014 If the lock the reference plane (F5) is on, and I then hit the XY-Plane button, the lock switches of, and the reference plane is automatic again. Anyone else get this? /Petter Link to comment Share on other sites More sharing options...
Tech Posted November 4, 2014 Share Posted November 4, 2014 Hi Petter, No, we are not getting this. If you Reboot your computer and test again, do you still get this? If so, what version of formZ are you using on which operating system? Link to comment Share on other sites More sharing options...
palarsen Posted November 4, 2014 Author Share Posted November 4, 2014 FormZ 8.0.0 Mac OS 10.10 Same after reboot and on fresh new user account. If I remember correctly, its that same on my laptop MacBookAir same system Link to comment Share on other sites More sharing options...
Tech Posted November 4, 2014 Share Posted November 4, 2014 Hi Petter, Everything is working fine here. Do you have the Face Snap enabled? (If you disable all object snaps, does that affect it?) Link to comment Share on other sites More sharing options...
palarsen Posted November 5, 2014 Author Share Posted November 5, 2014 Object snaps have no effect on the problem. It only happens if I hover over faces (with the reference plane unlocked), and then lock the plane with F5, and after that click on the XY plane button (or opt x). -lock is turned of Link to comment Share on other sites More sharing options...
palarsen Posted November 5, 2014 Author Share Posted November 5, 2014 Haha! I'm a "Newbie" in this forum! Feels like being young again Link to comment Share on other sites More sharing options...
Tech Posted November 5, 2014 Share Posted November 5, 2014 Hi Petter, Ok, so your report is: Draw a cube, place the cursor over a face, hit F5 to lock the plane, then click the XY plane and the lock turns off. Yes, in this specific case the lock plane should stay on. Thanks for bringing this to our attention, we will get it corrected. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.