Andrew West Posted September 24, 2015 Share Posted September 24, 2015 Maxwell was crashing Form.z 8.5 constantly whenever I tried to use Translate Shaded Best Match on my material palette. Mostly when I hit the preview button to see the end result in my material palette. So i did the following: Updated to Form.z 8.5.1 Updated to Maxwell 3.1.99.11 Updated to maxwell plug in 3.2.0.3 Same issue applies. Set up my material in Form.z as I like it. Usually by assigning Plastic as my material hint with a varying degree of specular reflection. Hit Maxwell Material button in material tab to adjust it to see if I can get Best Match. Hit preview button. CRASH every time! Very consistent. Once Again, I am under a deadline because I actually work for a living. So I am again reverting back to version 8.0.2 to see if I can get back to something that I can use right now. If not then it is back to Form.z 6.7 and Renderzone to get my clients something they can present immediately. When I bid a project I do not usually factor in the possibility that I will waste 10 to 20 hours of troubleshooting software incompatibility. 20 years ago maybe but not now. Link to comment Share on other sites More sharing options...
pylon Posted September 24, 2015 Share Posted September 24, 2015 Andrew, Thank you for your report about material previews not working in formZ 8.5 on Windows with the existing plugin. We have contacted ADS about this, and expect that the issue will be resolved soon. Compatibility between existing, publicly-released Maxwell plugins and new formZ "dot" releases is almost always not an issue. (In fact, I believe this is the fist time there has been an issue of this sort.) For now, work in 8.0.2 with the publicly released plugin. Link to comment Share on other sites More sharing options...
pylon Posted September 24, 2015 Share Posted September 24, 2015 Hi Andrew, Maxwell was crashing Form.z 8.5 constantly whenever I tried to use Translate Shaded Best Match on my material palette. We and the developers at ADS have been trying to reproduce this today, and have not had any success in duplicating what you are reporting, with either the beta 3.2.0.3 or release 3.1.1.6. (There is no 'Best Match' material hint, but if you mean 'Closest Match', that hint is only provided for compatibility with old projects, not new ones. Use 'Realistic Match' instead in new projects... you should see a message to this effect when invoking Closest Match. This has nothing to do with stability, though, only render efficiency.) Please provide a formZ project file that demonstrates this issue, along with any necessary dependencies, and we will look into it. Link to comment Share on other sites More sharing options...
pylon Posted September 24, 2015 Share Posted September 24, 2015 Please download and install the latest video driver from the manufacturer of the card on each of your computers. Does this help? Link to comment Share on other sites More sharing options...
Andrew West Posted December 1, 2015 Author Share Posted December 1, 2015 Realistic match is what I have been using. I have the latest video card driver from Nvidea. Still having issues. Link to comment Share on other sites More sharing options...
dubir Posted December 2, 2015 Share Posted December 2, 2015 When i ask for preview in the Maxwell window the Formz 8.5 crash Link to comment Share on other sites More sharing options...
dubir Posted December 2, 2015 Share Posted December 2, 2015 Preview make program stop working Link to comment Share on other sites More sharing options...
Tech Posted December 2, 2015 Share Posted December 2, 2015 Dubi, Did you send the file and its dependencies to Pylon? Link to comment Share on other sites More sharing options...
pylon Posted December 2, 2015 Share Posted December 2, 2015 Andrew, We have still not received you files. We are not reproducing this issue here. I am not sure why you have trouble sending us project files. If you provide files, and the developers can reproduce it, a problem gets fixed ASAP. Being able to reproduce the issue is critical; it can't be fixed otherwise. Even if it "happens with any project" from your perspective, we still need it to resolve the issue. Also, please run the command "Extensions> Maxwell Render> Forum" and post the resulting text here, so we can test on a system equivalent to yours. Link to comment Share on other sites More sharing options...
pylon Posted December 2, 2015 Share Posted December 2, 2015 Dubi, Please send a simple formZ project which reproduces the issue, along with all dependencies, such as MXMs, bitmap textures, etc. Please ZIP the project and dependencies and send via Dropbox (or equivalent) to Also, please run the command "Extensions> Maxwell Render> Forum" and post the resulting text here, so we can test on a system equivalent to yours.We will investigate why this might be happening and report back with a solution. Link to comment Share on other sites More sharing options...
dubir Posted December 2, 2015 Share Posted December 2, 2015 Maxwell for formZ 3.1.1.6 (Win 64) | form·Z® v 8.5.0.2 (Build 9709) | Windows 8 v 6.2 Build 9200 Intel® Core i7 CPU 920 @ 2.67GHz Link to comment Share on other sites More sharing options...
dubir Posted December 2, 2015 Share Posted December 2, 2015 File and dropbox folder sent to you Link to comment Share on other sites More sharing options...
pylon Posted December 2, 2015 Share Posted December 2, 2015 Hi Dubi, Thank you! We will investigate and get back to you. Link to comment Share on other sites More sharing options...
pylon Posted December 4, 2015 Share Posted December 4, 2015 Dubi, You only included the formZ project. We need all the dependencies: textures, mxms, HDRIs, etc. Use formZ's Save A Copy As... to collect all images referenced by formZ. Use Extensions> Maxwell Render> Workstation Transfer to collect all Maxwell dependencies. Please put all the resulting assets in the dropbox folder, and then post again. Thanks. Link to comment Share on other sites More sharing options...
dubir Posted December 6, 2015 Share Posted December 6, 2015 All are waiting for you in Dropbox. Thanks! Link to comment Share on other sites More sharing options...
pylon Posted December 14, 2015 Share Posted December 14, 2015 Hi Dubi, Thanks again for providing your files. Please test Maxwell for formZ Early Build 3.2.0.6. We believe we have this resolved, but need your feedback. Thanks! Link to comment Share on other sites More sharing options...
3dworks Posted December 15, 2015 Share Posted December 15, 2015 where can we get FZ 8.5.1? Link to comment Share on other sites More sharing options...
pylon Posted December 15, 2015 Share Posted December 15, 2015 Hi Markus, There is no 8.5.1 (yet). I think Andrew meant 8.5.0.1. Also, I believe what the Dubi and Andrew were reporting above was a "formZ is not responding" alert from windows (not a crash) during preview generation. Rather that wait it out (I could take some time to respond), they were force quitting the application. Again, this should be resolved with early build 3.2.0.6, and we encourage users to try it out. Link to comment Share on other sites More sharing options...
dubir Posted December 21, 2015 Share Posted December 21, 2015 Thanks!!! The Beta version fix the problem. Thank you Ben! Link to comment Share on other sites More sharing options...
pylon Posted December 21, 2015 Share Posted December 21, 2015 Excellent, good to hear Link to comment Share on other sites More sharing options...
dubir Posted December 26, 2015 Share Posted December 26, 2015 Same problems are here again ! sorry Ben Link to comment Share on other sites More sharing options...
Tech Posted December 28, 2015 Share Posted December 28, 2015 Dubi, If you check the exact same file you emailed Pylon before (the one that was fixed with the beta), do you still have the problem with that file? If that file is fine but another is not, please submit the other file so Pylon can investigate it... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.